Featured Post

Buy My "LEGO" Transformers designs in Barweer and Amazon.

  I am happy to announce that some of my LEGO Transformers designs have become official products under a few 3rd party building block brands...

Monday, August 12, 2019

(Updated with video!) LEGO Transformer Microscope from set 70842: Emmet's Couch Mech


Recently I found a great bargain for this set shown above at 50% off! And it's bought immediately! 




After building both the official couch and mech  models from this set, I discovered that the parts are perfect for  LEGO Transformers:


  • Enough ball joints to build knee, pelvis and shoulder joints
  • Good numbers of plates with bar and c-clips for moving parts required in transformation.
  • Presence of 1x4 plates (potential knee and elbow joints).
  • Some brackets for SNOTty purpose.

BUT...

  • It's lacking wheels  , so I can't build land based vehicle Transformer.
  • It's lacking wedge plates and very little slope parts... so I can't build sleek, air based vehicle Transformer

A microscope was born out of pure experimentation with this set.



An official Microscope Transformer character exists actually, an Autobot named Perceptor (below).





The core design was completed in about 3 days.



The clamps on the stage above can be substituted with LEGO minidoll's wings found from the set. I broke one of her wings actually so I can't implement them in this creation :(






The star is not included in this set



Transform!



In most recent Transformers toys, the weapons are neatly stored underneath the alternate mode. Here I am taking a cue from such feature.  This "weapon" also helps to secure the microscope mode to align its base from wobbliness due to ball joints.



Initially my design doesn't have these peg points.. but when posing with arm extended in robot mode....  those flaps kept sagging down , no thanks to gravity.



Robot Mode


In the original Transformers Perceptor, his 'scope is facing forward and becomes his shoulder mounted cannon. I decided to flip this so that the Microscope eye piece becomes the cannon barrel instead.




Don't ambush him from the back.. coz he know who's coming from behind, thanks to the scope magnifying ability even in robot mode, acting as his 3rd optical sensor. 

More Bot Photos!

\
The ankle tilt feature is unintentional ! Apparently the parts I used to build the feet has rounded corners to allow ankles to be tilted.


For most of my LEGO Transformers built from a single LEGO set,  having fingers is a luxury due to lack of required parts. Not this guy! But his fingertip is a bit creepy though.

No Weapons? No Problem!


He's good in hand to hand combat too!


As a scientist Transformer... he sure is one forward looking bot.. literally too. That's coz he has no neck articulation at all.


No I'm Not Done Yet!

He's a sitting duck in his alternate mode and he's not that fast a runner in robot mode. No worries.... his hovertank mode allows him to travel at 400km/hour for a max range or 8,000km.


His top speed is halved when he's firing his cannon when on the move. 



Click here for building instructions! Enjoy!

6 comments:

  1. This is amazing!!! I will keep checking back for the instructions. Very smart use of a set. Now you have made the 70842 a 4 n 1 set.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
    2. Thanks for your support ! Instructions is up now ! happy building...!!

      btw.. I'm making great progress in yet another LEGO TF from official set.. this time it's the LEGO Creator 31088 Deep sea creatures.

      Delete
  2. It's a great MOC and thx for your instructions .
    Waiting for your next big project.

    ReplyDelete
  3. This is great. I only bought this set when I saw this and I am so happy I did.

    ReplyDelete
  4. This set can be powerful enough to stand on par with star wars lego

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...