Featured Post

Buy My "LEGO" Transformers designs in Barweer and Amazon.

  I am happy to announce that some of my LEGO Transformers designs have become official products under a few 3rd party building block brands...

Tuesday, April 4, 2017

Creator 31058 Mighty Dinosaurs Alternate MOC with instructions!





24/11/2017 Updates!  An error have been found and corrected for the legs instructions!

When I first set my eyes on this set last year, I just knew it will not disappoint! Many AFOLs attempted to MOC alternate creations from this set with great result the last few months. I admit that I was late to this party, only started to unbox it about a month ago.



This set reminds me  of one Creator Set 31032 from few years ago where I MOCed a Transformer from , Infernus ( building instructions inside!).


I'm not so sure what I shall name this vehicle. Perhaps its a hovercar of some sort.



Transform!

The number of hinged parts are just adequate  enough for me to get to work. Suprisingly.... it took me just a day to crank this one out. (and a few hours more later of the month to refine it). 




Robot Mode 





Scarcity of parts means I must make do with compromising building techniques. The hinged part located between his thighs is one fine example . I'm torn between keeping the socket part or removing it altogether , revealing the ball ummmm receptable.






This is no camera trick! He actually can stand on one foot.


I'm sorry dude! Ran out of parts to make you a weapon. You'll just have to pose barehanded.





Incoming Building Instructions!

I spent a while trying to optimize the number of steps and ended up with a small bunch of images below. Enjoy!!

Both Arms



Head

Left Leg




Right Leg



Body



Final Merging

I hope you enjoy building this guy as much as I did! Thanks for all the support !! =)

20 comments:

  1. Ok, I built the 31058 Transformer! Does this guy have an official name?

    Overall instructions were pretty easy to follow. Only one thing, I noticed for each leg, it shows construction using 3 2x1 light green pieces. Since there are only 4 total, 2 of these have to be dark green 2x1. I noticed in the final models, one of the lower legs uses the dark green 2x1s so I was able to figure it out.

    These transformers are so fun to build. This is the 2nd one of yours I have built from the Creator sets. I find your designs are better than the official Lego models.

    If your Transformers were available as official sets I would totally buy them. I really hope Lego will partner with you to make your Transformers official sets.

    Thanks for sharing these with us!

    ReplyDelete
    Replies
    1. i don't think that thing has a name! But i'm gonna build it! Wish me luck!

      Delete
  2. I can tell you the instructions though. First, put a 1x2 1 clip plate on one stud on a 1x2 plate. Then, put a second 1x2 plate on the clip plate. Then, put a 1x2 1 bar plate on the second 1x2 plate. Then, put one of the white tubes with a clip on the bar plate. Then, put a normal sized bar in the tube clips tube. Then, put a 1x2 S.N.O.T brick with 4 side studs (two on each side) on the remaining stud on the first 1x2 plate. Then, put a 1x4 tile on the S.N.O.T brick and the bar plate. Then put a black technic pin in the remaining hole on the bottom of the S.N.O.T brick. And you have a blaster!

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. i will call this guy quick charger i plan to get this set just to build this model

    ReplyDelete
  5. Matthew Bobby,
    What is a S.N.O.T brick?

    ReplyDelete
  6. Alan,
    What is this guys name? I didn't catch it.

    ReplyDelete
    Replies
    1. this guy doesn't have a name i guess call him what you like

      Delete
  7. This comment has been removed by the author.

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
  9. i've built this guy before so i built him again because he's that good

    ReplyDelete
  10. This is the creator set I've been looking for for a long time, thanks for the great article

    ReplyDelete
  11. His alt mode reminds me more of a armed hoverboat then a hovercar.but its ausome anyway, i also have that set but made a diffrent Moc out of that( a fan made one)

    ReplyDelete
  12. I can show my moc from this set from the link
    https://suleforger.blogspot.com/2020/07/dragster-part-1-of-5.html
    and see it

    ReplyDelete
  13. I cant find the post

    ReplyDelete
  14. I wanna build this.

    ReplyDelete
  15. It's a really cool build , I will call him Hovermech

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...